Tekin's Element Proof ROC412 HD offers protection from the elements, giving you the power to take on the trails or track without fear of water, mud or snow! Designed for heavier trail or rock racing rigs, the ROC412 HD delivers more torque and more power on demand. The HD lineup offers the same trusted kV ratings so you can maintain desired speed and input voltage but the longer design offers more grunt when you need it. Using a 4-pole 12-slot motor design based off the award-winning T8 Series motors, the ROC412 HD harnesses the benefits of brushless efficiency and extreme amounts of torque to stay out on the trail longer with more power on tap. Couple the ROC412 HD with an RX4 Speed Control for the smoothest crawling system available! Crawling, Rock Racing precision, protection from the Elements and raw power are at your disposal!

​BUY NOW

RECOMMENDED APPLICATIONS

OFF ROAD

​ 1:10 4WD Trail Truck

​ 1:10 4WD Rock Racer

​

Voltage Limit: 4200kV - 2S

                           3100kV - 3S

                           2300kV - 4S

                           1800kV - 4S

                           1200kV - 6S

                             500kV - 6S

Weight: 221g / 7.8oz

Shaft Dimensions: 5mm (.196") x 15.3mm

Motor Diameter: 35.85mm / 1.40"

Motor Length: 62.5mm / 2.50"
Max Operating Temperature: 180°F / 82°C
Max RPM: 65,000

Bearing Dimensions: Front: 5 x 14 x 5mm

                                          Rear: 5 x 11 x 5mm

Rotor Size: 18.5mm

Rebuildable: Yes
Mounting Pattern: M3 @ 25.4mm / 1"

​

​ Element Proof design tackles Water, Mud and Snow*
18.5mm Rotor provides more Torque and Braking Power

​ 550 Length Can provides more Power and Torque

​ 4 Pole 12 Slot Hi-torque Motor Design

​ CNC Machined 6061 T6 Billet Aluminum Heatsink Can

​ Crawler and Trail Rig Specific

​ Neodymium Sintered Magnets

​ Rebuildable Design

​ High Purity Copper Windings Maximizes Efficiency

​ Precision Engineered for Maximum Energy Conversion

​ Dual-Plug Sensor Wire Harness

​ High RPM ABEC5 Oversized Bearings

* Element Proof ESCs and Motors are specially designed to withstand water splashes and are not meant to be submerged. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.

** The ROC412 EP is not intended for operation while submerged in liquid.

*** Anytime your motor sees water it is important that you perform the proper after run maintenance. Warranty does not cover neglect, lack of maintenance, bearings, rust or any damage that may occur if the motor is submerged in water.