Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.
The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.
The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.
SPECS
Input Voltage: 2S - All
3S - 10.5 and up
Weight: 161g / 5.7oz
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 50mm / 1.909"
Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
Rotor Size: 12.3mm - 25.5T
12.5mm - 21.5T rpm* / 17.5T rpm / 13.5T rpm / 21.5T / 17.5T / 13.5T / 10.5T / 9.5T / 8.5T
13mm - 7.5T / 6.5T / 5.5T / 4.5T / 4T / 3.5T / 2.5T
13mm Torque - 3.5T / 2.5T
Rebuildable: Yes
*RPM = High RPM On Road Version
RECOMMENDED APPLICATIONS
OFF ROAD
1:10 2WD Buggy
1:10 2WD Truck
1:10 2WD Short Course
1:10 4WD Buggy
1:12 2WD Pan Car
1:10 2WD Pan Car
1:10 World GT
1:10 2WD Formula 1
1:10 4WD TC
1:10 Drift
1:10 2WD
1:10 SK Car
1:10 Stock Car
1S LiPo Classes
FEATURES
CNC Machined 6061-T6 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnet
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity
Low Resistance, High Power Solder Tabs
Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
Anodized End-bell plates maximize corrosion and wear resistance
High RPM Precision Bearings
Rebuild-able Design
Solder-less Sensor PCB replacement
Adjustable Timing
Standard and RPM versions
MOTOR ONLY
TT2701 - GEN3 25.5T
TT2702 - GEN3 21.5T RPM
TT2703 - GEN3 21.5T
TT2704 - GEN3 17.5T RPM
TT2705 - GEN3 17.5T
TT2706 - GEN3 13.5T RPM
TT2707 - GEN3 13.5T
TT2708 - GEN3 10.5T
TT2709 - GEN3 9.5T
TT2710 - GEN3 8.5T
TT2711 - GEN3 7.5T
TT2712 - GEN3 6.5T
TT2713 - GEN3 5.5T
TT2714 - GEN3 5T
TT2715 - GEN3 4.5T
TT2716 - GEN3 3.5T
TT2717 - GEN3 2.5T
RS SPEC SYSTEMS
TT2740 - RS SPEC + GEN3 21.5T RPM
TT2741 - RS SPEC + GEN3 21.5T
TT2742 - RS SPEC + GEN3 17.5T RPM
TT2743 - RS SPEC + GEN3 17.5T
TT2744 - RS SPEC + GEN3 13.5T RPM
TT2745 - RS SPEC + GEN3 13.5T
RS GEN2 SYSTEMS
TT2730 - RS GEN2 + GEN3 21.5T RPM
TT2731 - RS GEN2 + GEN3 21.5T
TT2732 - RS GEN2 + GEN3 17.5T RPM
TT2733 - RS GEN2 + GEN3 17.5T
TT2734 - RS GEN2 + GEN3 13.5T RPM
TT2735 - RS GEN2 + GEN3 13.5T
TT2736 - RS GEN2 + GEN3 10.5T
TT2737 - RS GEN2 + GEN3 9.5T
TT2738 - RS GEN2 + GEN3 8.5T
RSX SYSTEMS
TT2750 - RSX + GEN3 8.5T
TT2751 - RSX + GEN3 7.5T
TT2752 - RSX + GEN3 6.5T
TT2753 - RSX + GEN3 5.5T
TT2754 - RSX + GEN3 4.5T
TT2755 - RSX + GEN3 3.5T
TT2756 - RSX + GEN3 2.5T
Tuning Rotors
TT2719 - 12.3 mm Spec Rotor
TT2721 - 12.5mm Spec Rotor - BLUE
TT2722 - 12.5mm Spec Rotor Strong - YELLOW
TT2723 - 13mm Modified Rotor - GREEN
TT2724 - 13mm HT* Modified Rotor - RED
Bearings
TT2727 - Redline GEN3 Bearing Set
Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
Motor Parts
TT2725 - Redline GEN3 Rebuild Kit: End Caps / Bearings / Solder Tabs / Isolator / Hardware
TT2726 - Redline GEN3 End Caps / Hardware
TT2728 - Redline GEN3 Sensor PCB
TT2729 - Redline GEN3 Solder Tabs / Isolator
* HT = High Torque Option Rotor
Rotors can be easily identified while installed by the color displayed on the end of the shaft at the rear carrier bearing.